![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiDYHI-HDx838VQaqu6nT1Fo_ZUysU6fD2feLemz51-dYf0xYCvqQ7GqyB4TU3oPttKmmM8TvgL2eRY9qRCpdMh8Y3QeoBWjzIW3099zSztC6a4Vqsdc4AMgbOtjwuIBW4P7KIC4uPlkbbC/s400/baal8.jpg)
Hey all...I've read a lot of magnetizing tutorials, but most seem to gloss over some key parts leaving me frustrated. So I wanted to see if I could do a better job. Please leave comments.
For a list of the tools I use, please check out my
Tools page.
The instructions to assemble a rhino are pretty straight forward and the rhino is arguably one of the easiest vehicles to assemble, so I will skip those parts and just show you the relevant sections for a Baal Predator. NOTE: I start with all the parts trimmed and I do test fittings before I glue any pieces. I used the 1/4" magnets for the sponsons and 1/8" for everything else in this tutorial.